How Much Does a New Residential Heat Pump Cost in Follansbee, WV? (2026–2027 Pricing Guide)
February 19th, 2026
3 min read
Follansbee Heat Pump Cost Guide (2026–2027)
Quick Answer:
A new residential heat pump in Follansbee costs $7,030–$13,270 for the outdoor unit. A matching air handler costs $4,850–$10,955. A full heat pump and air handler replacement ranges from $11,880–$24,225 installed under our 2026–2027 pricing guide.
Bottom Line:
Most full heat pump replacements in Follansbee fall between $11,880 and $24,225 installed. Replacing both indoor and outdoor components together protects efficiency, refrigerant compatibility, and warranty coverage.
Follansbee sits along the Ohio River with neighborhoods that rise quickly into elevated residential areas. That combination affects humidity load, wind exposure, and equipment access.
Our team brings 70+ years of combined HVAC experience, with 30+ years personally overseeing system design and commissioning. We calculate properly. We don’t guess.
2026–2027 Follansbee Heat Pump Pricing at a Glance
| Component | 2026–2027 Price Range |
|---|---|
| Heat Pump (Outdoor Unit) | $7,030–$13,270 |
| Air Handler | $4,850–$10,955 |
| Full Matched System | $11,880–$24,225 |
These are installed price ranges under our current pricing structure.
How Much Does a Heat Pump Cost in Follansbee?
Quick Answer:
A new heat pump outdoor unit in Follansbee costs $7,030–$13,270 installed, depending on tier, tonnage (2–5 tons), and efficiency level.
2026–2027 Heat Pump Tier Pricing
- Good: $7,030–$10,580
- Better: $9,705–$11,860
- Best: $10,790–$13,270
Higher tiers provide:
- Variable-speed compressors
- Stronger output below 17°F
- Higher SEER2 ratings
- Lower operating sound levels
Wind exposure above the river increases heating demand on elevated streets.
How Much Does an Air Handler Cost in Follansbee?
Quick Answer:
A new air handler costs $4,850–$10,955 installed, depending on blower type and airflow demands. Variable-speed air handlers improve comfort and humidity control.
2026–2027 Air Handler Tier Pricing
- Good: $4,850–$5,915
- Better: $6,535–$8,670
- Best: $9,195–$10,955
Many Follansbee homes built between 1940–1975 feature:
- Crawlspace duct systems
- Limited mechanical closet space
- 100-amp electrical service
- Original return duct sizing
Airflow correction is common in older homes near the town center.
How Much Does a Full Heat Pump System Cost in Follansbee?
Quick Answer:
A full matched heat pump and air handler replacement costs $11,880–$24,225 installed, depending on duct corrections, electrical upgrades, and equipment tier.
Most homes require 2–4 tons of capacity.
Final cost depends on:
- Electrical panel capacity
- Duct sealing or resizing
- Crawlspace conditions
- Hillside equipment placement
- Equipment tier selected
Geological and Neighborhood Considerations in Follansbee
Quick Answer:
Follansbee’s river proximity increases humidity load, while hillside neighborhoods increase wind exposure and heating demand.
Local factors include:
- River-adjacent moisture levels
- Elevated streets with wind exposure
- Narrow lot spacing limiting outdoor placement
- Older brick homes with modest insulation
- Crawlspaces prone to moisture intrusion
Humidity and airflow must be engineered correctly.
Manual J Load Calculations Are Required
Quick Answer:
Manual J determines the correct system size for your Follansbee home. Anyone not performing a Manual J load calculation is guessing. That should be considered a red flag when evaluating contractors.
Manual J evaluates:
- Elevation exposure
- Insulation levels
- Window orientation
- Air infiltration
- Duct leakage
Square footage alone is not a sizing method.
Oversizing reduces humidity control.
Undersizing affects winter comfort.
Why We Recommend Replacing Both Units Together
Quick Answer:
Replacing both indoor and outdoor components protects refrigerant compatibility and rated efficiency. R-22 is discontinued. R-410A is being phased down nationally.
Mismatched systems can:
- Reduce efficiency by 10–30%
- Create refrigerant compatibility issues
- Limit warranty eligibility
Matched systems protect long-term performance.
Real Follansbee Installation Example
A 1,800 sq ft hillside home required:
- 3-ton variable-speed system
- Crawlspace duct sealing
- Outdoor unit repositioned for grade stability
That project fell in the middle of our $11,880–$24,225 range.
Elevation and airflow correction increased heating load compared to valley properties.
Who Is a Heat Pump a Good Fit For in Follansbee?
Quick Answer:
Heat pumps work well in insulated homes with sealed duct systems and adequate electrical capacity.
Who May Need Infrastructure Upgrades?
Quick Answer:
Homes with outdated panels, crawlspace moisture issues, or significant duct leakage may require upgrades before installation.
We evaluate this during your exact quote appointment.
How Do I Get an Exact Heat Pump Quote in Follansbee?
Quick Answer:
We perform a Manual J load calculation, inspect ductwork, verify electrical capacity, and provide a written exact quote. No pressure. No surprises.
Our process includes:
- Load calculation
- Duct inspection
- Electrical review
- Equipment matching
- Written exact quote
No upsells. No games.
What Guarantees Do You Offer?
Quick Answer:
New installations qualify for our Lifetime Trust Shield. Repairs qualify for our Service Trust Guardian. Annual maintenance keeps coverage active.
Lifetime Trust Shield (New Installations)
- 15-year labor warranty
- 90-day money-back guarantee
- No-lemon replacement
- First-year maintenance included
Service Trust Guardian (Repairs Only)
- 5-year labor warranty
- 60-day satisfaction guarantee
- No overtime charges
- On-time arrival guarantee
We stand behind our work.
Frequently Asked Questions
Do heat pumps work well near the river?
Quick Answer:
Yes, when properly sized and paired with a variable-speed air handler. Humidity control depends on airflow design.
How long does a heat pump last in Follansbee?
Quick Answer:
A properly installed heat pump typically lasts 12–15 years with annual maintenance.
Can I replace only the outdoor unit?
Quick Answer:
You can, but full matched replacement protects efficiency and warranty coverage.
How long does installation take?
Quick Answer:
Most full system replacements are completed in one day unless electrical or duct modifications are required.
Final Follansbee Heat Pump Pricing Summary (2026–2027)
- Heat pump only: $7,030–$13,270
- Air handler only: $4,850–$10,955
- Full matched system: $11,880–$24,225
We calculate.
We explain.
We fix it right.
Call Honest Fix today for your free exact quote.
Scott Merritt is a co-founder of Honest Fix Heating, Cooling and Plumbing and brings more than 30 years of experience across HVAC, leadership, and industry education. He serves in a senior leadership and oversight role, providing licensed guidance, reviewing HVAC educational content, and supporting technician training and documentation standards. Prior to co-founding Honest Fix, Scott founded and owned Fire & Ice Heating & Air Conditioning in Columbus, Ohio, which he operated for more than two decades before selling the company in 2025. During that time, he led programs and partnerships including Carrier Factory Authorized Dealer, Trane Comfort Specialist, and Rheem Pro Partner, helping establish high technical and training standards. Scott is the Ohio State HVAC license holder for Honest Fix and provides licensed oversight to help ensure work meets applicable codes and manufacturer requirements. Learn more about Scott’s background and role at Honest Fix by viewing his full leadership bio.
